3Com 3CRWEASYA73 / WL-575 User Manual page 80

C 5: S C
HAPTER YSTEM ONFIGURATION
Figure 29 AP Management
Management UI – Enables or disables management through Telnet, Wed (HTTP),
or SNMP interfaces.
NOTE: Secure Web (HTTPS) connections are not affected by the UI Management
or IP Management settings.
Management IP – Restricts management access to Telnet, Web, and SNMP
interfaces to specified IP addresses. (Default: Any IP)
Telnet UI Status: Enables or disables management access through Telnet.
(Default: Enable)
Web UI Status: Enables or disables management access through the web (HTTP)
interface. (Default: Enable)
SNMP UI Status: Enables or disables management access through SNMP.
(Default: Enable)
Any IP: Indicates that any IP address is allowed management access.
Single IP: Specifies a single IP address that is allowed management access.
Multiple IP: Specifies an address range as defined by the entered IP address and
subnet mask. For example, IP address 169.254.1.6 and subnet mask
255.255.255.0, defines all IP addresses from 169.254.2.2 to 169.254.1.254.
5-32