3Com 3CRWEASYA73 / WL-575 User Manual page 131

BSSID – The MAC address that identifies the detected device.
Event Logs
The Event Logs window shows the log messages generated by the access point
and stored in memory.
Figure 57 Event Logs
The Event Logs table displays the following information:
Clear Logs: Clears the currently stored log list.
Log Time: The time the log message was generated.
Event Level: The logging level associated with this message. For a description of
the various levels, see "logging level" on page 5-49.
Event Message: The content of the log message.
Error Messages – An example of a logged error message is: "Station Failed to
authenticate (unsupported algorithm)."
This message may be caused by any of the following conditions:
Access point was set to "Open Authentication", but a client sent an
authentication request frame with a "Shared key."
Access point was set to "Shared Key Authentication," but a client sent an
authentication frame for "Open System."
WEP keys do not match: When the access point uses "Shared Key
Authentication," but the key used by client and access point are not the same,
the frame will be decrypted incorrectly, using the wrong algorithm and
sequence number.
5-83
Security