3Com 3CRWEASYA73 / WL-575 User Manual page 277

Default Setting
802.11a: embedded antenna, 802.11b/g: diversity
Command Mode
Interface Configuration (Wireless)
Command Usage
The antenna ID must be selected in conjunction with the antenna control
method to configure proper use of any of the antenna options.
Example
AP(if-wireless g)#antenna control right
AP(if-wireless g)#
antenna id
This command specifies the antenna type connected to the access point
represented by a four-digit hexadecimal ID number, either the integrated diversity
antennas (the "Default Antenna") or an optional external antenna.
Syntax
antenna id <antenna-id>
• antenna-id - Specifies the ID number of an approved antenna that is
connected to the access point. The options are:
802.11a:
- Original 3Com Integrated Antenna
- 3CWE591 3Com 6/8dBi Dual-Band Omni Antenna
- 3CWE596 3Com 18/20dBi Dual-Band Panel Antenna
- 3CWE598 3Com 8/10dBi Dual-Band Panel Antenna
802.11b/g:
- Original None external antenna
- 3CWE591 3Com 6/8dBi Dual-Band Omni Antenna
- 3CWE596 3Com 18/20dBi Dual-Band Panel Antenna
- 3CWE598 3Com 8/10dBi Dual-Band Panel Antenna
Default Setting
Original 3Com Integrated Antenna
Command Mode
Interface Configuration (Wireless)
6-145
Using the Command Line Interface