C
6: C
L
HAPTER
OMMAND
INE
Command
filter ethernet-type
protocol
show filters
filter local-bridge
This command disables communication between wireless clients. Use the no form
to disable this filtering.
Syntax
Default
Command Mode
Command Usage
Example
AP (config)#filter local-bridge
AP (config)#
I
NTERFACE
Function
Sets a filter for a specific Ethernet type
Shows the filter configuration
filter local-bridge <all-VAP | intra-VAP>
no filter local-bridge
all-VAP - When enabled, clients cannot establish wireless communications
with any other client, either those associated to the same VAP interface or
any other VAP interface.
intra-VAP - When enabled, clients associated with a specific VAP
interface cannot establish wireless communications with each other.
Clients can communicate with clients associated to other VAP interfaces.
Disabled
Global Configuration
This command can disable wireless-to-wireless communications between
clients via the access point. However, it does not affect communications
between wireless clients and the wired network.
6-114
Mode
Page
GC
6-117
Exec
6-117