Show Bootfile; Radius Client - 3Com 3CRWE876075 User Manual

C 5: C L
HAPTER OMMAND INE

show bootfile

This command displays the name of the current operation code file that booted
the system.
Syntax
Command Mode
Example
Enterprise AP#show bootfile
Bootfile Information
===================================
Bootfile : ec-img.bin
===================================
Enterprise AP#

RADIUS Client

Remote Authentication Dial-in User Service (RADIUS) is a logon authentication
protocol that uses software running on a central server to control access for
RADIUS-aware devices to the network. An authentication server contains a
database of credentials, such as users names and passwords, for each wireless
client that requires access to the access point.
Table 19 RADIUS Client
Command
radius-server address
radius-server port
radius-server key
radius-server retransmit
radius-server timeout
radius-server
port-accounting
radius-server
timeout-interim
radius-server
radius-mac-format
I
NTERFACE
show snmp filter-assignments
Exec
Function
Specifies the RADIUS server
Sets the RADIUS server network port
Sets the RADIUS encryption key
Sets the number of retries
Sets the interval between sending authentication
requests
Sets the RADIUS Accounting server network port
Sets the interval between transmitting accounting
updates to the RADIUS server
Sets the format for specifying MAC addresses on the
RADIUS server
5-64
Mode Page
GC 5-65
GC 5-65
GC 5-66
GC 5-66
GC 5-67
GC 5-67
GC 5-68
GC 5-68