Ricoh D146 Service Manual page 905

Main SP Tables-2-1
004 Standard Speed: Ye
005 Middle Speed: Bk
006 Middle Speed: Ma
007 Middle Speed: Cy
008 Middle Speed: Ye
009 Low Speed: Bk
010 Low Speed: Ma
011 Low Speed: Cy
012 Low Speed: Ye
[Shad. Correct Setting]
Changes exposure light amount form each beam.
§
Value increase: Light amount increases, and image density gets deeper.
2154
§
Value decrease: Light amount decreases, and image density gets thinner.
Except, if Process control is executed, light amount / density will change.
Beam interval light amount: No need to operate.
002 Front End Area: Bk: LD1
003 Front End Area: Bk: LD2
004 Front End Area: Bk: LD3
005 Front End Area: Bk: LD4
007 Front End Area: Ma: LD1
008 Front End Area: Ma: LD2
009 Front End Area: Ma: LD3
010 Front End Area: Ma: LD4
012 Front End Area: Cy: LD1
013 Front End Area: Cy: LD2
014 Front End Area: Cy: LD3
D146/D147/D148/D149/D150
*ENG [50 to 120 / 100 / 1%/step]
*ENG [50 to 120 / 100 / 1%/step]
*ENG [50 to 120 / 100 / 1%/step]
*ENG [50 to 120 / 100 / 1%/step]
*ENG [50 to 120 / 100 / 1%/step]
*ENG [50 to 120 / 100 / 1%/step]
*ENG [50 to 120 / 100 / 1%/step]
*ENG [50 to 120 / 100 / 1%/step]
*ENG [50 to 120 / 100 / 1%/step]
*ENG [50.0 to 150.0 / 100.0 / 0.1%/step]
*ENG [50.0 to 150.0 / 100.0 / 0.1%/step]
*ENG [50.0 to 150.0 / 100.0 / 0.1%/step]
*ENG [50.0 to 150.0 / 100.0 / 0.1%/step]
*ENG [50.0 to 150.0 / 100.0 / 0.1%/step]
*ENG [50.0 to 150.0 / 100.0 / 0.1%/step]
*ENG [50.0 to 150.0 / 100.0 / 0.1%/step]
*ENG [50.0 to 150.0 / 100.0 / 0.1%/step]
*ENG [50.0 to 150.0 / 100.0 / 0.1%/step]
*ENG [50.0 to 150.0 / 100.0 / 0.1%/step]
*ENG [50.0 to 150.0 / 100.0 / 0.1%/step]
2-186 System Maintenance Section