Main SP Tables-1
1142
[Fusing Jam Detection]
SC Display
001
Display SC or not when detecting a fusing jam 3 times in a roll.
1151
[Pressure Setting]
Pressure Change ON/OFF
001
Do not change. Switch welding pressure.
Pressure Time1
002
Do not change. Rotate time form pressure filler edge to pressure 1
Pressure Time2
003
Do not change. Rotate time form pressure filler edge to pressure 2
Depressure Time
005
Do not change. Rotate time form depressure filler edge to depressure position
Shift Time:Energy Saving
010
Do not change. Printer: Change depressure timing when standing by after
paper trough of image process temperature correction level 2.
Shift Time
011
Do not change. Change depressure timing when standby.
Rotary speed
Do not change. Adjusts rotate speed of fusing depressure drive. Rotate
051
speed[pps]= basis rotate speed[pps]+basis rotate speed[pps] x SP set value
[%}
1151
[Pressure Setting]
101 Pressure:Plain1/2
D146/D147/D148/D149/D150
[0 or 1 / 0 / 1/step]
*ENG
0: OFF
1: ON
[0 or 1 / 1 / 1/step]
*ENG
0: OFF
1: ON
*ENG
[0 to 10000 / 70 / 10msec/step]
*ENG
[0 to 10000 / 70 / 10msec/step]
*ENG
[0 to 10000 / 0 / 10msec/step]
*ENG
[0 to 3600 / 0 / 1sec/step]
*ENG
[0 to 3600 / 60 / 1sec/step]
*ENG
[-12.8 to 12.7 / 0 / 0.1%/step]
*ENG
[0 to 3 / 2 / 1/step]
2-82
System Maintenance Section