Ricoh D146 Service Manual page 775

Main SP Tables-1
028 Temp.:End:SRA3:Thick
1119 [Aging Temp. Correction]
001 Page(%)
002 Rotation(%)
011 Temp.:Plain:FC
012 Temp.:Plain:BW
013 Temp.:Plain:Energy Saving
1121 [Switch:Rotation Start/Stop]
Time:After Reload
001
Do not change. Time for to switch form reload to standby.
Time:After Recovery
002
Do not change. Standby transition: Changes time out time till depressuring.
Time:After Job
003
Do not change. Time for to switch form before paper through to standby.
Press Temp.:After Reload
004
Do not change. Pressure thresh to apply time to switch from reload to standby
End Temp.:After Job:SRA3
005
Do not change. Rotation start temperature for equaling edge part heat after
paper through (A3<paper width, pressure edge part)
-
006
Do not change. Rotation start temperature for equaling edge part heat after
paper through (DLT<paper width<=A3, pressure edge part)
-
007
Do not change. Rotation start temperature for equaling edge part heat after
paper through (B4<paper width<=DLT, pressure edge part)
D146/D147/D148/D149/D150
*ENG [-30 to 30 / 20 / 1deg/step]
*ENG [0 to 100 / 10 / 1%/step]
*ENG [0 to 100 / 10 / 1%/step]
*ENG [0 to 20 / 0 / 1deg/step]
*ENG [0 to 20 / 0 / 1deg/step]
*ENG [0 to 20 / 10 / 1deg/step]
*ENG [0 to 100 / 60 / 1sec/step]
*ENG [0 to 100 / 15 / 1sec/step]
*ENG [0 to 100 / 60 / 1sec/step]
*ENG [0 to 160 / 160 / 1deg/step]
*ENG [0 to 250 / 200 / 1deg/step]
*ENG [0 to 250 / 200 / 1deg/step]
*ENG [0 to 250 / 200 / 1deg/step]
2-56 System Maintenance Section