Ricoh D146 Service Manual page 1200

Sets Smoothing level for FAX Apli: Special Original 2 mode. 0 is for OFF, Larger
the value, the Smoother.
Brightness: 1-255
007
Sets Brightness level (1 to 255) for FAX Apli: Special Original 2 mode. 128 is for
No Correction, Larger the value, the Brighter.
Contrast: 1-255
008
Sets Contrast level (1 to 255) for FAX Apli: Special Original 2 mode. 128 is for
No Correction, Larger the value, Stronger the Contrast.
Independent Dot Erase (0)/
1-7 (Strong)
009
Sets Independent Dot Erase level for FAX Apli: Special Original 2 mode. 0 is for
OFF, Larger the value, Stronger the Erase.
4600 [SBU Version Display]
SBU ID
001
In case of SBU's ID is irregular due to SBU malfunction, or wrong part is set,
sets a cause flag to SP 4-647-001 and makes SC 144-00.
SCAT ID
Displays ID of SBU (SCAT).
002
In case of SBU's ID is irregular due to SBU malfunction, or wrong part is set,
sets a cause flag to SP 4-647-001 and makes SC 144-00.
[Scanner Memory Access]
4602
Read/Writes register of ASIC: GASBU mount to SBU.
Use for design evaluation/failure analysis.
001 -
002 Scanner Memory Access
003 Data Set
System Maintenance Section
*ENG [1 to 255 / 128 / 1/step]
*ENG [1 to 255 / 128 / 1/step]
*ENG [0 to 7 / 0 / 1/step]
ENG [0x00 to 0xFF / 0 / 1/step]
ENG [0x00 to 0xFF / 0 / 1/step]
[0x000000 to 0xFFFFFF /
ENG
0x000000 / -]
ENG [0x0 to 0x000000FF / 0x000000 / -]
ENG -
2-481
Main SP Tables - 4
D146/D147/D148/D149/D150