Ricoh D146 Service Manual page 1295

Main SP Tables-5
[Individual PM Part Alarm Call]
5516
With @Remote in use, these SP codes can be set to issue an PM alarm call
when one of SP parts reaches its yield.
Disable/Enable Setting (0: Not
001
send, 1: Send)
Percent yield for triggering PM
004
alert
5517 [Get Machine Information]
Get SMC Info Retry Internal
031
When SMC info collect is interrupt, retries during the time between receving
Request for obtaining SMC info, to value set with this setting.
5610 [Base Gamma Ctrl Pt:Execute]
Get Factory Default
004
Factoryreset the ACC execution result (create base gamma with factory
adjusted value).
Set Factory Default
005
Overwrites the factory adjusted value with base gamma control point (current
value).
Restore Orginal Value
006
Reset the ACC execution result (create base gamma with last adjusted value).
D146/D147/D148/D149/D150
[0 or 1 / 1 / 1/step]
*CTL 0: Not send
1: Send
*CTL [1 to 255 / 75 / 1 %/step]
*CTL [10 to 255 / 10 / 1min/step]
ENG [0 or 1 / 0 / 1/step]
ENG [0 or 1 / 0 / 1/step]
ENG [0 or 1 / 0 / 1/step]
2-576 System Maintenance Section