Ricoh D146 Service Manual page 896

2119 [Skew Adjustment Display]
M
001
M: skew current location: display.
C
002
C: skew current location: display.
Y
003
Y: skew current location: display.
2120 [Thick Paper Skew Adj]
On/Off
001
Corrects thick paper skew.
2121 [Skew Adjust Coefficient]
Coefficient
001
Correcting coefficient for skew.
2140 [TM/ID Sensor Check Result]
PWM: Front
Saves / Refreshes PWM setting value of TMP sensor [Front] to this setting
005
value when Vsg adjustment is done.
From then on, PWM setting value will be this setting value during belt check.
When Vsg adjust fails, saving / refreshing will not be done to this setting
System Maintenance Section
*ENG [-75 to 75 / 0 / 1pulse/step]
*ENG [-75 to 75 / 0 / 1pulse/step]
*ENG [-99 to 99 / 0 / 1pulse/step]
*ENG [0 or 1 / 0 / 1/step]
*ENG [0 to 2 / 0 / 1/step]
ENG [0 to 1023 / 0 / 1/step]
2-177
Main SP Tables-2-1
D146/D147/D148/D149/D150