Ricoh D146 Service Manual page 746

Do not change. Paper feed start permission temp. lower diff from target temp. :
edge: special mode 1
Temp.:Upper
Delta:End:Power B
055
Do not change. Paper feed start permission temp. upper diff from target temp. :
edge: special mode 1
Temp.:Lower
Delta:Press:Power B
056
Do not change. Paper feed start permission temp. lower diff from target temp. :
pressure: special mode 1
Rotation Time:Power B
057
Do not change. Paper feed permission setting rotate before decision time:
special mode 1
1105 [Print Target Temp.]
Plain1:FC:Center
001
Paper through target temperature: Standard paper 1: FC: center
Fusing malfunction might improve by setting value larger.
Paper curl might improve by setting value smaller.
Adjusting range is +/- 5 deg. celsius.
Plain1:FC:Press
002
Do not change. paper through target temperature: Standard paper 1: FC:
pressure
System Maintenance Section
*ENG [0 to 200 / 30 / 1deg/step]
[0 to 200 / D146, D147:77,
D148:71, D149(NA TW): 37,
*ENG D149(EU, AS, CHN, KOR): 63,
D150(NA, TW): 25, D150(EU, AS,
CHN, KOR): 43 / 1deg/step]
*ENG [0 to 100 / 0 / 1sec/step]
[100 to 180 / D146:118, D147:118,
*ENG D148:131, D149:147, D150:147 /
1deg/step]
[0 to 200 / D146:118, D147:118,
*ENG D148:118, D149:138, D150:138 /
1deg/step]
2-27
Main SP Tables-1
D146/D147/D148/D149/D150