Ricoh D146 Service Manual page 739

Main SP Tables-1
ForcedReloadTime:Cold:FIN-less/ADF-attached
214
Do not change. Reload permission force reload time: cold: No FIN/With ADF
1102 [Feed Permit Setting]
Temp.:Lower Delta:Center
001
Do not change. Paper feed start permission temp. lower diff from target temp. :
center
Temp.:Lower Delta:End
002
Do not change. Paper feed start permission temp. lower diff from target temp. :
edge
Temp.:Upper Delta:Center
003
Do not change. Paper feed start permission temp. upper diff from target temp. :
center
Temp.:Upper Delta:End
004
Do not change. Paper feed start permission temp. upper diff from target temp. :
edge
005 Temp.:Lower Delta:Press
D146/D147/D148/D149/D150
*ENG
[0 to 200 / D146:40, D147:40,
*ENG D148:52, D149:40, D150:40 /
1deg/step]
[0 to 200 / D146:40, D147:40,
*ENG D148:52, D149:40, D150:40 /
1deg/step]
*ENG [0 to 200 / 30 / 1deg/step]
*ENG [0 to 200 / 30 / 1deg/step]
[0 to 200 / D146, 147: 90,
D148(NA, TW): 80, D148(EU, AS,
CHN, KOR): 83, D149 and
*ENG
D150(NA, TW): 95, D149 and
D150(EU, AS, CHN, KOR): 100 /
1deg/step]
2-20
[0.0 to 100.0 /
D146:4.9,
D147:4.9,
D148:5.0,
D149:6.1,
D150:6.1 /
0.1sec/step]
System Maintenance Section