Ricoh D146 Service Manual page 725

Main SP Tables-1
[By-Pass Size Detection]
1007
-
Switch LT SEF/LG SEF
001
Select either LT SEF or LG SEF to detect preferentially when using bypass tray
which can not auto detect size.
By-Pass Jam Detection Set
Special order function for old models: When receiving long length FAX, enter
002
max. size of custom size for when setting receiving in bypass size, prevent from
jamming shorter data than that. 0: Normal detect : when paper size is different
form set size (longer of shorter), jam. 1: Simple detect: Jam when paper size
is longer than set size.
[SI By-Pass Size Detection Adj]
1008
-
Sidefence Auto Adj
001
With one action bypass models, switches do or do not side fence auto fine tune
when paper is set. But when setting auto fine tune off, detectable paper size will
drop to same as regular bypass tray.
Paper Set Fix Time
Set the waiting time to activate the side fence auto adjustment after a stack of
003
paper has been set on the by-pass tray. Will have more time till side fence to star
moving when setting waiting time longer, but time for setting paper will also be
loner. If waiting time is short, side fence might star to move during setting paper.
SC or malfunction or so will not occur.
D146/D147/D148/D149/D150
[0 or 1 / 0 / 1/step]
ENG 0:OFF
1:ON
[0 or 1 / 0 / 1/step]
ENG 0: Normal Detection
1: Simple Detection
2-6
[0 or 1 / 1 /
1/step]
*ENG
0: OFF
1: ON
[0 to 10 / 2 /
*ENG
1sec/step]
System Maintenance Section