Ricoh D146 Service Manual page 898

2142 [TM/ID Sensor Check Result]
Maximum: Front
With the image transfer belt / TMP sensor check mode result, take average of
005
each 10 sampling data from TMP sensors [Front] detecting result data, and
from of all sampling data, save / refresh this SP with the max. value.
Maximum: Center
With the image transfer belt / TMP sensor check mode result, take average of
006
each 10 sampling data from TMP sensors [Center] detecting result data, and
from of all sampling data, save / refresh this SP with the max. value.
Maximum: Rear
With the image transfer belt / TMP sensor check mode result, take average of
007
each 10 sampling data from TMP sensors [Rear] detecting result data, and from
of all sampling data, save / refresh this SP with the max. value.
2143 [TM/ID Sensor Check Result]
Minimum: Front
With the image transfer belt / TMP sensor check mode result, take average of
005
each 10 sampling data from TMP sensors [Front] detecting result data, and
from of all sampling data, save / refresh this SP with the min. value.
Minimum: Center
With the image transfer belt / TMP sensor check mode result, take average of
006
each 10 sampling data from TMP sensors [Center] detecting result data, and
from of all sampling data, save / refresh this SP with the min. value.
Minimum: Rear
With the image transfer belt / TMP sensor check mode result, take average of
007
each 10 sampling data from TMP sensors [Rear] detecting result data, and from
of all sampling data, save / refresh this SP with the min. value.
System Maintenance Section
*ENG [0.00 to 5.50 / 0.00 / 0.01V/step]
*ENG [0.00 to 5.50 / 0.00 / 0.01V/step]
*ENG [0.00 to 5.50 / 0.00 / 0.01V/step]
*ENG [0.00 to 5.50 / 0.00 / 0.01V/step]
*ENG [0.00 to 5.50 / 0.00 / 0.01V/step]
*ENG [0.00 to 5.50 / 0.00 / 0.01V/step]
2-179
Main SP Tables-2-1
D146/D147/D148/D149/D150