Ricoh D146 Service Manual page 1135

Main SP Tables-3
Prevents poor cleaning by racing the image transfer when smaller than
temperature threshold t1 and poor cleaning occurred right after Pro-Con/MUSIC
etc... adjust pattern was entered when starting up machine fist in the morning.
Temperature Threshold:T2
005
Adjusts temperature threshold of poor cleaning to occur after Pro-Con/MUSIC
etc... adjusting pattern was entered.
Temperature Threshold:T1
006
Adjusts temperature threshold of poor cleaning to occur after Pro-Con/MUSIC
etc... adjusting pattern was entered.
Temperature Threshold:T3
007
Adjusts threshold for wide stripes to occur in the image of the next job caused
by image transfer belt cleaning after job stops.
3554 [TransBltCleanBladeReplMode:Exe]
Execute
001
Executes replace mode of paper transfer cleaning blade.
* Specification unapplied SP, No use.
Idle Time
Sets paper transfer racing time for when replace mode of paper transfer
002
cleaning blade.
* Specification unapplied SP, No use.
3555 [ImageQuality Adj. Counter:Disp]
Charge AC Control
001
For to use with adjusting control of electrify AC bias.
3600 [Select ProCon]
001 Potential Control
D146/D147/D148/D149/D150
*ENG [20 to 30 / 25 / 1deg/step]
*ENG [0 to 15 / 15 / 1deg/step]
*ENG [0 to 30 / 5 / 1deg/step]
ENG [0 or 1 / 0 / 1/step]
ENG [0.1 to 60.0 / 10.0 / 0.1sec/step]
*ENG [0 to 2000 / 0 / 1page/step]
[0 or 1 / 1 / 1/step]
*ENG 0: OFF
1: ON
2-416 System Maintenance Section