Ricoh D146 Service Manual page 657

SC No. Level
SC876-02 D
SC No. Level
SC876-03 D
SC No. Level
SC876-04 D
SM
Error Name/Error Condition/Major Cause/Solution
Log Data Error 2
An error was detected in the handling of the log data at power
on or during machine operation.
Log encryption is enabled but encryption module is not installed.
§
Replace or set again the encryption module.
§
Disable the log encryption setting.
Error Name/Error Condition/Major Cause/Solution
Log Data Error 3
An error was detected in the handling of the log data at power
on or during machine operation.
Inconsistency of encryption key between NV-RAM and HDD.
§
Disable the log encryption setting.
§
Initialize LCS memory (SP5801-019).
§
Initialize the HDD (SP5-832-004).
Error Name/Error Condition/Major Cause/Solution
Log Data Error 4
An error was detected in the handling of the log data at power
on or during machine operation.
§
Log encryption key is disabled but the log data file is
encrypted. (NVRAM data corruption)
§
Log encryption key is enabled but the log data file is not
encrypted. (NVRAM data corruption)
Initialize the HDD (SP5-832-004).
5-183
Service Call 816-899
D146/D147/D148/D149/D150