Ricoh D146 Service Manual page 1392

Finisher booklet max. paper
count custom setting
003
Makes possivle for finisher to middle fold more than the basic foldable amount.
Middle fold max. amount will be recognized as the total of this SP's value and
basic Middle fold amunt.
6890 [Punch Function Enabled (Z Fold)]
001 -
6900 [ADF Bottom Plate Setting]
-
001
For 1 path simultaneous duplex models only. Changes bottom plate rising mode.
System Maintenance Section
*CTL [0 to 50 / 0 / 1/step]
[1 to 0 / 0 / 1/step]
CTL 0: No Punch
1: Punching OK
[0 or 1 / 0 / 1/step]
0: Bottom plate rise on original set
*ENG (default)
1: Bottom plate rise on paper exit
signal.
2-673
Main SP Tables-6
D146/D147/D148/D149/D150