Ricoh D146 Service Manual page 763

Main SP Tables-1
Print Ready:Center
007
Do not change. Prepare printing target temperature: fusing
Print Ready:Press
008
Do not change. Prepare printing target temperature: pressure
Standby Heater Off Time
011
Do not change. After switching to ready, turn heater 3 OFF until passes.
1108 [After Reload/Job Target Temp.]
Center
001
Do not change. After reload/after paper through target temperature: center
Press
002
Do not change. After reload/after paper through target temperature: pressure
Center:Energy Saving
011
Do not change. After reload/after paper through target temperature: center:
BW2
Press:Energy Saving
012
Do not change. After reload/after paper through target temperature: pressure:
BW2
1111 [Environment Correction:Fusing]
001 Temp.: Threshold: Low
D146/D147/D148/D149/D150
[100 to 180 / D146, D147: 128,
D148(NA, TW): 141, D148(EU,
AS, CHN, KOR): 131, D149,
*ENG
D150(NA, TW): 157, D149,
D150(EU, AS, CHN, KOR): 147 /
1deg/step]
*ENG [0 to 200 / 120 / 1deg/step]
*ENG [0 to 100 / 0 / 1sec/step]
[0 to 200 / D146:123, D147:123,
*ENG D148:141, D149:157, D150:157 /
1deg/step]
*ENG [0 to 200 / 120 / 1deg/step]
[0 to 200 / D146:112, D147:112,
*ENG D148:118, D149:135, D150:135 /
1deg/step]
*ENG [0 to 200 / 120 / 1deg/step]
*ENG [0 to 100 / 17 / 1deg/step]
2-44 System Maintenance Section