Ricoh D146 Service Manual page 661

SC No. Level
D
SC881-01
SC No. Level
SC882-01 D
SM
Error Name/Error Condition/Major Cause/Solution
Authentication area error
§
Software error detected.
§
This error may occur even if IC card option
(ERIE/AYU/Greenland etc.) is not installed.
§
This is caused by accumulation of abnormal authentication
information in the software. (User operation will not directly
cause it.)
§
Occurs when authentication is done.
Example: When a job is sent to the printer/when logged on
from the operation panel/when logged on from a Web
browser
Turn the main power off/on.
Error Name/Error Condition/Major Cause/Solution
Cheetah Operation Panel error (Cheetah Operation Panel
Software Invalid error)
Occurs when the validity of the operation unit is not observed.
§
Memory corruption of the operation panel software.
§
Invalid applications are listed in the operation panel.
§
Format the Operation panel through SP mode
§
Updating the firmware
5-187
Service Call 816-899
D146/D147/D148/D149/D150