Ricoh D146 Service Manual page 1379

Main SP Tables-6
004 North Europe 4Hole
005 North America 2Hole
[Main-scan PunchPosAdj:FrontFIN]
Adjusts position of width direction (main scan direction) for punch.
6131
§
Adjusting value to -: hole position moves toward front side of machine.
§
Adjusting value to +: hole position moves toward rear side of machine.
Domestic 2Hole(Europe
001
2Hole)
002 North America 3Hole
003 Europe 4Hole
004 North Europe 4Hole
005 North America 2Hole
[Jogger Fence Fine Adj:FrontFIN]
Adjusts width (main scan direction) of edge stitch jogger when running specified
6132
paper conformity.
§
Adjusts value to -: move towards jogger width is tighter than base value.
§
Adjusts value to +: move towards jogger width is wider than base value.
001 A3T
002 B4T
003 A4T
004 A4Y
005 B5T
006 B5Y
007 DLT-T
008 LG-T
009 LT-T
D146/D147/D148/D149/D150
*ENG
*ENG
*ENG
*ENG
[-2.0 to 2.0 / 0.0 / 0.4mm/step]
*ENG
*ENG
*ENG
*ENG [-1.5 to 1.5 / 0.0 / 0.5mm/step]
*ENG [-3.0 to 3.0 / 0.0 / 0.5mm/step]
*ENG [-3.0 to 3.0 / 0.0 / 0.5mm/step]
*ENG [-1.5 to 1.5 / 0.0 / 0.5mm/step]
*ENG [-3.0 to 3.0 / 0.0 / 0.5mm/step]
*ENG [-3.0 to 3.0 / 0.0 / 0.5mm/step]
*ENG [-3.0 to 3.0 / 0.0 / 0.5mm/step]
*ENG [-3.0 to 3.0 / 0.0 / 0.5mm/step]
*ENG [-3.0 to 3.0 / 0.0 / 0.5mm/step]
2-660 System Maintenance Section