Ricoh D146 Service Manual page 651

SC No. Level
SC868-01 D
* Do not format an SD card supplied with the main machine or sold as an option. You may only format SD
cards used for Firmware Update by a Customer Engineer.
SC No. Level
SC868-02 D
SM
Error Name/Error Condition/Major Cause/Solution
SD card access error
The SD controller returned an error during operation.
(Error occurred at the mount point of /mnt/sd1)
§
SD card defective
§
SD controller defective
SD card that starts an application
§
Turn the main power off and check the SD card insertion
status.
§
If no problem is found, insert the SD card and turn the
main power on.
§
If an error occurs, replace the SD card.
§
SD card for users
§
In case of a file system error, reformat the SD card
(using the "SD Formatter" made by Panasonic).*
§
In case of a device access error, turn the main power off
and check the SD card insertion status.
§
If no problem is found, insert the SD card and turn the
main power on.
§
If an error occurs, use another SD card.
§
If the error persists
Error Name/Error Condition/Major Cause/Solution
SD card access error
The SD controller returned an error during operation.
(Error occurred at the mount point of /mnt/sd1)
§
SD card defective
§
SD controller defective
5-177
Service Call 816-899
D146/D147/D148/D149/D150