Ricoh D146 Service Manual page 891

Main SP Tables-2-1
[Erase Margin Adjustment]
2103
Sets trim for duplex.
006 Duplex Trail. L Size
007 Duplex Trail. M Size
008 Duplex Trail. S Size
009 Duplex Left Edge
010 Duplex Right Edge
011 Duplex Trail. L Size:Thick
012 Duplex Trail. M Size:Thick
013 Duplex Trail. S Size:Thick
014 Duplex Left Edge:Thick
015 Duplex Right Edge:Thick
[Polygon Rotation Time]
2106
Sets pre-rotating time/ post-rotating time for polygon motor.
Warming-Up
Sets pre-rotating time for polygon motor. With touching the operating during
001
standby, polygon motor will pre-rotate.
With this, waiting time will be shorter.
Job End
002
Sets post-rotating time for polygon motor. Polygon motor will post-rotate after
printing. If a print order come during post-rotation, printing will start faster.
D146/D147/D148/D149/D150
*ENG [0.0 to 4.0 / 1.0 / 0.1mm/step]
*ENG [0.0 to 4.0 / 0.8 / 0.1mm/step]
*ENG [0.0 to 4.0 / 0.6 / 0.1mm/step]
*ENG [0.0 to 1.5 / 0.3 / 0.1mm/step]
*ENG [0.0 to 1.5 / 0.3 / 0.1mm/step]
*ENG [0.0 to 4.0 / 1.0 / 0.1mm/step]
*ENG [0.0 to 4.0 / 0.8 / 0.1mm/step]
*ENG [0.0 to 4.0 / 0.6 / 0.1mm/step]
*ENG [0.0 to 1.5 / 0.3 / 0.1mm/step]
*ENG [0.0 to 1.5 / 0.3 / 0.1mm/step]
*ENG [0 to 60 / 10 / 1sec/step]
*ENG [0.0 to 60.0 / 0.1 / 0.1sec/step]
2-172 System Maintenance Section