Ricoh D146 Service Manual page 516

Service Call 501-584
SC No. Level
SC No. Level
SC502-01 B
D146/D147/D148/D149/D150
Error Name/Error Condition/Major Cause/Solution
§
1st tray limit sensor connector missing, malfunction, dirt
§
1st tray lift motor connector missing, disconnection,
malfunction
§
Foreign matter, such as paper scrap, is caught between the
paper feed tray and the tray lift motor.
§
Paper set fault
§
Paper overload
§
Reset the paper
§
Remove the foreign matter
1st tray limit sensor, 1st tray lift motor
§
Check the harness
§
Reset the connector
§
Replacement
1st paper feed unit, 1st tray
§
Replacement
Paper transport IOB
§
Replacement
Error Name/Error Condition/Major Cause/Solution
2nd Tray Lift Error
The 2nd tray lift motor error detection count reaches 3.
(up to 2, reset is displayed)
§
2nd tray limit sensor connector missing, malfunction, dirt
§
2nd tray lift motor connector missing, disconnection,
malfunction
§
Foreign matter, such as paper scrap, is caught between the
paper feed tray and the tray lift motor
§
Paper set fault
5-42 SM