Ricoh D146 Service Manual page 767

Main SP Tables-1
Do not change. Judge heat accumulation: voltage detecting pressure
temperature thresh
1115 [Target Temp. Correction]
Temp.:Delta:End
001
Do not change. Target temperature differential value of center and edge
1116 [Heat Storage FB Control]
Execution mode
001
Do not change. Applying area of heat accumulate amount FB control
Time Out
011
Do not change. Time from start paper through to start temperature correct.
Delay:Standard Speed:FC:1
021
Do not change. Time to get pressure temperature from F GATE standard peed:
FC: 1
Delay:Standard Speed:BW:1
022
Do not change. Time to get pressure temperature from F GATE standard peed:
BW: 1
031 Delay:Standard Speed:FC:2
D146/D147/D148/D149/D150
*ENG [-100 to 100 / 0 / 1deg/step]
[0 to 2 / 0 / 1/step]
0: OFF
*ENG
1: ON(BW)
2: ON(BW/FC)
*ENG [0 to 500 / 10 / 1sec/step]
[0 to 20000 / D146:3590,
D147:3590, D148:2810,
*ENG
D149:2050, D150:2050 /
1msec/step]
[0 to 20000 / D146:1320,
*ENG D147:1320, D148:1040, D149:760,
D150:760 / 1msec/step]
[0 to 20000 / D146:3590,
D147:3590, D148:2810,
*ENG
D149:2050, D150:2050 /
1msec/step]
2-48 System Maintenance Section