Ricoh D146 Service Manual page 517

SC No. Level
SC502-02 B
SM
Error Name/Error Condition/Major Cause/Solution
§
Reset the paper
§
Remove the foreign matter
2nd tray limit sensor, 2nd tray lift motor
§
Check the harness
§
Reset the connector
§
Replacement
2nd paper feed unit, 2nd tray
§
Replacement
Paper transport IOB
§
Replacement
2nd Tray Lowering Error
The detection count of 2nd tray descent motor descent errors
reaches a total of 5.
(up to 4, reset is displayed)
§
The 2nd paper feed tray limit sensor connector missing,
malfunction, and dirt
§
2nd tray lift motor connector missing, disconnection,
malfunction
§
Foreign matter, such as paper scrap, is caught between the
paper feed tray and the tray lift motor
§
Paper set fault
§
Paper overload
§
Reset the paper
§
Remove the foreign matter
2nd tray limit sensor, 2nd tray lift motor
§
Check the harness
§
Reset the connector
§
Replacement
2nd paper feed unit, 2nd tray
§
Replacement
Paper transport IOB
§
Replacement
5-43
Service Call 501-584
D146/D147/D148/D149/D150