Ricoh D146 Service Manual page 1336

Sets the maximum number account entries of the delivery server user
information managed by UCS.
LDAP Search Timeout
010
Sets the length of the timeout for the search of the LDAP server.
WSD Maximum Entries
020
Sets the maximum entries for the address book of the WSD (WS-scanner).
021 Folder Auth Change
Addr Book
040
Migration(USB->HDD)
Fill Addr Acl Info
This SP must be executed immediately after installation of an HDD unit in a
basic machine that previously had no HDD. The first time the machine is
powered on with the new HDD installed, the system automatically takes the
address book from the NVRAM and writes it onto the new HDD. However, the
new address book on the HDD can be accessed only by the system
administrator at this stage. Executing this SP by the service technician
immediately after power on grants full address book access to all users.
041
Procedure
1. Turn the machine off.
2. Install the new HDD.
3. Turn the machine on.
4. The address book and its initial data are created on the HDD automatically.
5. However, at this point the address book can be accessed by only the
system administrator or key operator.
6. Enter the SP mode and do SP5846-041. After this SP executes
successfully, any user can access the address book.
System Maintenance Section
*CTL [1 to 255 / 60 / 1/step]
*CTL [50 to 250 / 250 / 1/step]
[0 or 1 / 0 / 1/step]
*CTL
0: Login User, 1: Destination
[- / - / -]
*CTL
[Execute]
[- / - / -]
*CTL
[Execute]
2-617 D146/D147/D148/D149/D150
Main SP Tables-5