Removing The Faceplate; Replacing The Faceplate - NEC UNIVERGE SV8100 System Hardware Manual

Issue 5.0
6 - 28
10.1.1

Removing the Faceplate

1. Use the small notch at the lower right corner of the telephone,
to lift the faceplate up.
Each corner has a plastic locking pin which releases as
the faceplate is lifted up.
10.1.2

Replacing the Faceplate

1. Place the faceplate back on the telephone.
2. At each corner, press the locking pin back into place.
Figure 6-18 Removing the Faceplate
Installing SV8100 Optional Equipment
UNIVERGE SV8100