Shift Code Input - Leibinger Jet 2 Manual

Group 7

7.2.6 Shift code input

With this function the printer can print automatically a predefined text depending on a
predefined time period. This changing text can also combined with a fix text that will not
change depending of the time.
To input a shift code you have to proceed like following:
E.g.: „LJET" should be written.
In the first shift at 6.00 am „LJET 001".
In the second shift at 12.00 am „LJET 002".
In the third shift at 8.00 pm „LJET 003".
! Press the touch field <new text> in the menu level <E3>.
! The "type face menu (font menu)" <E9> is called up.
! After choosing the font the line menu <E15> either the keyboard field <E50>will be
displayed if necessary.
! Entry the text "LJET".
! By the touch field <Shift> (40) scroll as long as the menu level <E60> appears.
! Press the touch field <Shift > (41). The Leibinger-Jet 2 changes to the shift definition
mode. T To indicate that the shift definition mode is active, the display background
will be colored black.
! Go back to the keyboard field <E50> with the <Shift>-button (40).
! Input 001 followed by; 002 ; 003 (so 001;002;003).
Pay attention! The„;" causes the seperation between the several shifts. You will find
! Go back to the menu level <E60> again with the <Shift>-button (40) and confirm the
input by pressing the touch field <Shift > (41) again.
! By the <Shift>-button (40) you can leave the menu and you can finish the process in
the next possible menu level by pressing the touch field <ESCAPE>.
! With the touch field <take over > (43) in the menu level <E1> the set ups will be
taken over to the production.
Observation:
The touch field <take over > will be only displayed if the nozzle is open!
In the menu level <E44> you can input the shift times. Further informations can be found
in the chapter Expiry date and shift times!
Release 3.00
the „;" – character (42) on the menu level <E52>.
Data Entry Page 80
Leibinger-Jet 2 se