Aligning The Push Rollers; Standby Of The Push Roller; Aligning The Push Roller - GRAPHTEC FC8000 SERIES User Manual

2 -
4

Aligning the Push Rollers

This section describes how to alignment of the push rollers.

Standby of the Push Roller

With the FC8000-100/130/160 models, the number of push rollers required to hold down the media varies
according to the width of the loaded media. Be sure to move a push roller that is not used to the standby
position so that it does not affect the cutting or plotting operation.
Standby Position

Aligning the Push Roller

Position the left and right push rollers to correspond with the width of the media. Adjust the push rollers so
that they are positioned above both the media and the grit rollers. Position the push rollers within the grit roller
position stickers ensures that they are above the grit rollers.
Push roller
CAUTION
To move the push rollers, the media set lever must be in the lowered position.
Roller position
sticker
Grit roller
NG
OK
2-13
NG
OK