Setting The Separator - GRAPHTEC FC8000 SERIES User Manual

5
Confirm the setting and press the [ENTER] key (SET).
Setting will be set, and it will return to MEDIA setting screen (2/2).
6
Press the [MENU] key.
It will return to default screen.

Setting the Separator

Operation
1
Turn on the AP MODE by performing the steps 1-6 of "Switching
Apparel Mode"
P.4-14
AP MODE is switched on and it will return to AP MODE screen.
2
Press the [3] key (GP-GL) or the [4] key (HP-GL).
SEPARATOR setting screen is displayed.
3
Press the POSITION (▲▼) key and select the SEPARATOR.
4
Confirm the setting and press the POSITION (◄) key
(PREVIOUS).
Separator will be selected and it will return to AP MODE screen.
5
Confirm the setting and press the [ENTER] key (SET).
Setting will be set, and it will return to MEDIA setting screen (2/2).
6
Press the [MENU] key.
It will return to default screen.
.
4-16
Supplement
It will return to MEDIA setting
without changing the settings when you press the
POSITION (◄) key (CANCEL).
Supplement
SEPARATOR cannot be set if the AP MODE is off.
Supplement
It will cross cut when the command set as a
POSITION
separator is received.
Separator can be selected from F, JO, H, or FS for
the GP-GL.
Separator can be selected from AF, AH, PG, NR,
SP, IP, SC, IW, PS, DF, or IN for the HP-GL.
POSITION
"-" is showing that no separator is selected.
Supplement
It will return to MEDIA setting
without changing the settings when you press the
POSITION (◄) key (CANCEL).
screen (2/2)
screen (2/2)