GRAPHTEC FC8000 SERIES User Manual page 145

21
Press the POSITION (▲▼) key to set the original distance on
the data.
22
Confirm the setting and press the [ENTER] key (SET).
It will return to default screen once all the distance is set.
Supplement
Measured distance is displayed in the top line in
l
the DISTANCE input screen. Input value (initially
same as measured value) is displayed under
that.
If the input value is not changed, it will assume
l
that there is no difference between measured
distance and the distance in the data.
Digits of settings can be changed by pressing
l
the [FAST] key.
Supplement
It will return to default screen without changing
l
the settings when you press the POSITION (◄)
key (PREVIOUS).
DISTANCE input screen for point 3 is displayed
l
if it is set to 3POINTS or more, so repeat steps
9 and 10 to set.
6-6