GRAPHTEC FC8000 SERIES User Manual page 161

4
Press the [1] key.
CONDITION No. selection screen is displayed.
5
Press the POSITION (▲▼) key and select the CONDITION No.
6
Confirm the setting value, and press the POSITION (◄) key
(PREVIOUS).
C ONDITION No. is selected and return to CUT LINE PATTERN
setting screen.
7
Press the [2] key (TYPE No.).
TYPE No. setting screen is displayed.
8
Press the POSITION (▲▼) key and select the TYPE No. .
9
Confirm the setting value, and press the POSITION (◄) key
(PREVIOUS).
T YPE No. is selected and return to CUT LINE PATTERN setting
screen.
10
Press the POSITION (►) key (UP MODE).
UP MODE setting screen is displayed.
Next page
POSITION
POSITION
POSITION
Supplement
CUT L and UP L is displayed when the TYPE
l
POSITION
No. 0-7 is selected. Also, you will be able to set
the UP MODE.
Setting for all becomes enabled when USER is
l
selected.
Nothing will be displayed when OFF is selected.
l
Supplement
POSITION
Setting range is from 1 to 48, and "UP".
7-16