Table of Contents
Advertisement
3
Press the POSITION (▲) key.
ARMS setting screen (4/4) is displayed.
4
Press the [3] key (SENSING LEVEL).
SENSING LEVEL adjusting screen is displayed.
5
Press the [1] key (X).
SENSING LEVEL X adjusting screen is displayed.
6
Press the POSITION (▲▼) key and increase or decrease the
setting value.
7
Confirm the setting and press the POSITION (◄) key
(PREVIOUS).
S ENSING LEVEL is selected and it will return to SENSING LEVEL
adjusting screen.
8
Press the [2] key (Y).
SENSING LEVEL Y adjusting screen is displayed.
9
Press the POSITION (▲▼) key and increase or decrease the
setting value.
Next page
POSITION
Supplement
It will return to ARMS setting screen (4/4)
l
without changing the settings when you press
the POSITION (◄) key (CANCEL).
Detection level will define the threshold to be
l
placed at what percentage point of the signal
level difference between the media background
color and the registration mark. So the setting
range becomes 30 to 90 (%).
X sets the level to detect the registration mark
l
when moving in the X direction, and Y sets
the level to detect the registration mark when
moving in the Y direction.
Supplement
It will ignore the dust and bumps on the media
surface, but it will make the detection of the
registration harder mark if the value of the
"SENSING LEVEL" is set to larger number. The dust
and bumps on the media surface might be detected
as registration mark by mistake if the value of the
"SENSING LEVEL" is set to smaller number.
Supplement
Setting range is from 30 to 90.
POSITION
POSITION
Supplement
Setting range is from 30 to 90.
POSITION
5-20
Advertisement
Table of Contents
Troubleshooting
