6
Confirm that the pen tool is set.
7
Confirm that operation area of tool and media is safe.
8
Press the [1] key (DONE).
Output of the dump list starts.
9
Turn the power off to stop the printing.
Do not place your hand around the moving areas.
The tool carriage will start moving, so there is a
chance of injury.
Supplement
It will return to TEST menu screen without
●
printing by pressing the [2] key (CANCEL DATA
DUMP).
It will keep on printing until the power is turned
●
off once the printing is started by pressing the [1]
key (START DATA DUMP).
13-20
CAUTION