Setting The Space Rear - GRAPHTEC FC8000 SERIES User Manual

Setting the Space Rear

Operation
1
Turn on the AP MODE by performing the steps 1-6 of "Switching
Apparel Mode"
AP MODE is switched on and it will return to AP MODE screen.
2
Press the POSITION (►) key (SPACE REAR).
SPACE REAR setting screen is displayed.
3
Press the POSITION (▲▼) key and increase or decrease the
setting value.
4
Confirm the setting and press the POSITION (◄) key
(PREVIOUS).
SEPARATOR settings will be selected and it will return to AP
MODE screen.
5
Confirm the setting and press the [ENTER] key (SET).
Setting will be set, and it will return to MEDIA setting screen (2/2).
6
Press the [MENU] key.
It will return to default screen.
P.4-14 .
Supplement
SPACE REAR cannot be set if the AP MODE is
off.
POSITION
Supplement
Setting range is between 7 and 30 mm.
POSITION
POSITION
Supplement
It will return to
without changing the settings when you press the
POSITION (◄) key (CANCEL).
4-17
MEDIA setting
screen (2/2)