Related to Plotter Environment
Fan Suction Setting (FAN POWER)
This function sets the suction force used to affix media to the plotter.
It may not feed properly if the media is thin, so decrease the suction force.
Operation
1
Press the [MENU] key in the default screen.
MENU screen is displayed.
2
Press the POSITION (▼) key (ADV.).
ADVANCE setting screen (1/3) is displayed.
3
Press the POSITION (▼) key.
ADVANCE setting screen (2/3) is displayed.
4
Press the [2] key (FAN POWER).
FAN POWER setting screen is displayed.
5
Press the [2] key (WEAK) or the [1] key (NORMAL).
6
Confirm the setting and press the [ENTER] key (SET).
Setting will be set, and it will return to ADVANCE setting screen (2/3).
7
Press the [MENU] key.
It will return to the default screen.
POSITION
POSITION
10-6