Setting Offset Between The Registration Mark And Cutting Origin Points - GRAPHTEC FC8000 SERIES User Manual

8
Press the [1] key (5mm), the [2] key (10mm), or the[3] key
(50mm).
CUSTOM UNIT is selected and it will return to DISTANCE ADJUST screen.
9
Confirm the setting and press the [ENTER] key (SET).
Setting will be set, and it will return to ARMS setting screen (2/4).
10
Press the [MENU] key.
It will return to default screen.

Setting Offset Between the Registration Mark and Cutting Origin Points

The distance between the cutting origin point and the register mark (POINT1) is called axis origin offset. Default
value of axis origin offset is 0.0 for both X and Y, but it can be set in the range from -1000.0 mm to +1000.0 mm.
Operation
1
Press the [MENU] key.
MENU screen is displayed.
2
Press the [2] key (ARMS).
ARMS SETTING screen (1/4) is displayed.
3
Press the POSITION (▼) key.
ARMS SETTING screen (2/4) is displayed.
Next page
Cutting Origin Point
X offset
Registration mark (point 1)
Y offset
Supplement
It will return to MARK DISTANCE screen without
changing the settings when you press the
POSITION (◄) key (PREVIOUS).
POSITION
5-16