Setting Distance Adjustment Between The Registration Mark - GRAPHTEC FC8000 SERIES User Manual

Cutting pro
Hide thumbs Also See for FC8000 SERIES:
Table of Contents

Advertisement

8
Press the POSITION (▲▼) key and increase or decrease the
setting value.
9
Confirm the setting and press the POSITION (◄) key
(PREVIOUS).
M ARK DISTANCE is selected and it will return to MARK
DISTANCE screen.
10
Confirm the setting and press the [ENTER] key (SET).
Setting will be set, and it will return to ARMS setting screen (1/4).
11
Press the [MENU] key.
It will return to default screen.

Setting Distance Adjustment Between the Registration Mark

It will adjust the cutting if the distance between the registration marks are different from the original value on
the data using the ratio calculated from the difference. This is called distance adjustment between registration
marks.
There are following 3 modes for adjustment between registration marks.
User: O riginal value on the data against the distance of scanned registration marks are entered manually to
perform adjustment.
Custom: I f the distance between the registration mark are to be output in factors of 5, 10, or 50 mm, set that
unit as the "CUSTOM UNIT", and automatically adjust the distance between the registration marks.
For example, set the "CUSTOM UNIT" to 5 mm, and if the distance between the scanned registration
marks were 312 mm, it will be rounded off to the closest 5 mm, and the adjustment will be performed
so the ideal distance will be 310 mm.
Standard: D epending on the settings of the distance between the registration marks (see "Setting Mark
Distance"
distance between scanned registration mark will be rounded off to the nearest units selected, which
will be used as the original value on the data to perform the adjustment.
Operation
1
Press the [MENU] key.
MENU screen is displayed.
Next page
), either 5, 10, or 50 mm will be selected as the unit automatically. Values of the
P.5-12
Supplement
Digits of settings can be changed by pressing the
POSITION
[FAST] key.
Setting range is from 0.0 to 50000.0 mm.
POSITION
Supplement
It will return to ARMS setting screen (1/4) without
changing the settings when you press the
POSITION (◄) key (CANCEL).
5-14

Advertisement

Table of Contents
loading

Table of Contents