GRAPHTEC FC8000 SERIES User Manual page 188

12
Press the [4] key (HANDSHAKE).
HANDSHAKE setting screen is displayed.
13
Press the [1] key (HARDWIRE), the [2] key (Xon/off), or the [3]
key (Enq/Ack).
HANDSHAKE will be selected, and it will return to RS-232C setting screen.
14
Confirm the setting and press the [ENTER] key (SET).
Setting will be set, and it will return to INTERFACE setting screen (2/3).
15
Press the [MENU] key.
It will return to default screen.
Supplement
Match the setting value of the application to be
l
used.
It will return to RS-232C setting screen when
l
you press POSITION (◄) key (PREVIOUS).
Enq/Ack setting is valid only when it is set to
l
HP-GL. It will be set to HARDWIRE even if
Enq/Ack is selected when it is set to GP-GL.
9-9