GRAPHTEC FC8000 SERIES User Manual page 177

5
Press the POSITION (▲▼) key and increase or decrease the
setting value.
6
Confirm the setting and press the [ENTER] key (SET).
Setting will be set, and it will return to TOOLS SETTING screen (2/3).
7
Press the [MENU] key.
It will return to default screen.
Supplement
Values that can be set are AUTO, 10, 20, 30,
l
POSITION
40, 50, and 60.
It will be same speed as tool is lowered when
l
AUTO is selected.
Supplement
It will return to TOOLS SETTING screen (2/3)
without changing the settings when you press the
POSITION (◄) key
8-10
(CANCEL)
.