GRAPHTEC FC8000 SERIES User Manual page 251

9
Using the "+" plotted by tool 1, measure the distance to the "+"
plotted by tool 3.
Tool 2
10
Press the [3] key (X).
X AXIS ALIGNMENT setting screen is displayed.
11
Press the POSITION (▲▼) key to increase or decrease the
value to set the difference in X axis direction measured in step
9.
12
Confirm the setting and press the POSITION (◄) key
(PREVIOUS).
X AXIS ALIGNMENT is selected and return to the TOOL OFFSET
ADJ. screen.
13
Press the [4] key (Y).
Y AXIS ALIGNMENT setting screen is displayed.
14
Press the POSITION (▲▼) key to increase or decrease the
value to set the difference in Y axis direction measured in step
9.
15
Confirm the setting and press the POSITION (◄) key
(PREVIOUS).
Y AXIS ALIGNMENT is selected and return to the TOOL OFFSET
ADJ. screen.
16
Repeat steps 5 to 15 until there is no difference.
17
Confirm the distance and press the [ENTER] key (SET).
Setting will be set, and it will return to TOOLS SETTING screen (1/3).
Next page
Tool 1
Y mm
X
Y
X mm
POSITION
POSITION
POSITION
POSITION
14-14