Stop Cutting - GRAPHTEC FC8000 SERIES User Manual

Stop Cutting

Operation
1
Press the [STOP] key.
Operation will stop and following screen is displayed.
2
Press the [2] key (QUIT JOB).
Following screen is displayed.
3
Press the [1] key (CLEAR).
F ollowing screen is displayed, the buffer memory is cleared, and
it will return to default screen.
Supplement
It will resume cutting by pressing [1]
l
(CONTINUE) key.
See "Pause and Resume Cutting"
l
Supplement
It will return to operation stop screen without
clearing buffer memory when [2] key (CANCEL) is
pressed.
3-13
P.3-12
.