GRAPHTEC FC8000 SERIES User Manual page 143

6
Press the POSITION (▲) key.
ARMS SETTING screen (4/4) is displayed.
7
Press the [1] key (AXIS ALIGNMENT TOOL).
AXIS ALIGNMENT TOOL selection screen is displayed.
8
Press the [1] key (LOUPE) or the [2] key (LIGHT POINTER)
depending on the toll set in step 2.
9
Confirm the setting and press the [ENTER] key (SET).
Setting will be set, and it will return to ARMS setting screen (4/4).
10
Press the POSITION (▼) key.
ARMS setting screen (1/4) is displayed.
11
Press the [3] key (MARK SCAN MODE).
MARK SCAN MODE screen is displayed.
12
Press the [1] key (MARK SCAN MODE).
MARK SCAN MODE setting screen is displayed.
13
Press the [3] key (AXIS ALIGNMENT).
A XIS ALIGNMENT mode is selected and it will return to MARK
SCAN MODE screen.
Next page
POSITION
POSITION
Supplement
It will return to MARK SCAN MODE screen
without changing the settings when you press the
POSITION (◄) key (PREVIOUS).
6-4