GRAPHTEC FC8000 SERIES User Manual page 236

Cutting pro
Hide thumbs Also See for FC8000 SERIES:
Table of Contents

Advertisement

4
Press the [1] key (ERROR MESSAGES).
E RROR MESSAGES list screen is displayed. Left column is time
the error occurred, and right column is the type of the error. 4
error messages are displayed at once. If there are more error
messages, next 4 messages will be displayed by pressing the
POSITION (▲▼) key.
5
Press the [1] to [4] keys to see the contents of the error.
Error message corresponding to the pressed key is displayed.
6
Press the [ENTER] key (CONFIRM) when the error message is
confirmed.
It will return to ERROR MESSAGES list screen.
7
Press the [MENU] key.
It will return to default screen.
Supplement
"NO ERROR" will be displayed if there is no
l
error.
Up to 4 error messages will be displayed on
l
the screen. Up to 32 error messages can be
displayed by pressing the POSITION (▲▼) key.
Supplement
Press the POSITION (▲▼) key in the screen of
step 4 as necessary and repeat steps 5 and 6 if
there are multiple error messages you would like
to see.
13-23

Advertisement

Table of Contents
loading

Table of Contents