5.5 Replacing Consumables
5.5.5
Replacing the Staple Cartridge
If the Professional Finisher (optional) is installed, and it is time to replace the sta-
ple cartridge (R1), a message appears on the LCD of the control panel. When
this message appears, replace the staple cartridge with a new one.
The use of staple cartridges not recommended by Fuji Xerox may impair quality and performance.
Use only staple cartridges recommended by Fuji Xerox for the printer.
To order a staple cartridge, contact our Customer Support Center.
Procedure
1
Check that the printer is not printing,
and then open the front cover of the fin-
isher.
5
2
Hold the staple cartridge holder by its
lever (R1), and draw out the staple car-
tridge holder to the right towards you
until it stops.
3
Remove the staple cartridge holder by
holding the orange lever.
The staple cartridge is attached firmly. Strongly pull
when removing the staple cartridge.
146