Fuji Xerox DocuPrint C4350 User Manual page 288

7.2 Description of Common Menu
Password
If a password is set for the PDF file, set the password beforehand. Printing is enabled only when the
password set for the PDF file and the password you entered match.
Up to 32 alphanumeric characters can be used.
Collated
Set whether to collate the printed sheets by copy (1, 2, 3...1, 2, 3...) when printing more than one
copy.
The default is [Off].
Output Size
Set the output paper size.
[A4] (default)
Print on A4 size paper.
[Auto]
Automatically selects the output paper size according to the document size and settings of the PDF
file to be printed.
If [8x11"] is set in the print setting [Basic Paper Size], [8x11"] is displayed instead of [A4].
If [8x11"] is selected, letter-size (8x 11 inches) paper is used.
Layout
Set the print layout.
This item is available when [Process Mode] is set to [PDF Bridge].
[Auto %] (default)
Automatically sets % of printing so that the document is enlarged to a maximum, to fit the output
paper size. A4 size or letter size is automatically selected according to the document size of the PDF
file when printed.
[100% (No Zoom)]
Sets 100% for printing, regardless of the output paper size.
7
[Booklet]
Enables 2-sided print, allocating pages to individual sheets of output paper like a catalogue according
to the page composition of the PDF file. However, catalogue printing is disabled depending on the
page composition. In this case, [Auto %] is used instead.
When [Output Size] is set to [A4], the document is printed on A4 size paper.
●
When [Output Size] is set to [Auto], it is printed on A3 or A4 size paper.
●
[2 Up]
Prints 2 pages of a document on each sheet of output paper. When [2 Up] is selected, the paper size is
fixed to A4.
[4 Up]
Prints 4 pages of a document on each sheet of output paper. When [4 Up] is selected, the paper size is
fixed to A4.
258