6.1
6.1.1
Course of Action for Troubleshooting
The course of action for troubleshooting is as follows.
Follow the steps below.
A problem
Check "6.1.2 Unusual Conditions"(P.185)
Are your printer, computer and server set
6
correctly for the network environment in use?
Notes and restrictions on the use of this printer may be applied.
If the problem still persists even after you take the appropriate action according to the steps shown
above, contact our Customer Support Center or your dealer.
184
Type of Problem
Is the print quality bad?
If the print quality is poor
"6.4 Poor Print Quality"(P.219)
Is a message displayed on the control panel?
If a message is displayed
"6.5 List of Messages"(P.223)
To check the settings
Sections that describe settings for each network environment
For a TCP/IP environment, refer to "6.6 Troubleshooting When Working in a TCP/IP
Environment" (P.248). For other environment, the system administrator should take the
corrective action by referring to manual in the Software Pack CD-ROM supplied with
this printer.
For more information, refer to "C Precautions/Limitations" (P.313) and the manual
contained in the Software Pack CD-ROM supplied with this printer.