Table of Contents
Advertisement
Message
Open G.Reload R4Punch
Container
Corrupt HD file Press Set key
xxxx.xxxx
Printing...Tray *
xxxx
Printing...Tray**
Ended with Error
(***-***)
Off-line
Off-line
Data in memory
Option not
installed
[Cause]
The punch dust box of the finisher is not correctly set.
[Action]
Open the finisher front cover (G), and set the punch dust
box correctly.
"3.1 Main Components and Their Functions" (P.30)
[Cause]
If the internal hard disk (optional) is installed, data on the
internal hard disk may be destroyed, because the power
goes off due to a power failure while the printer is operating.
[Action]
Press the <Eject/Set> button. Internal hard disk will be ini-
tialized.
When the internal hard disk is initialized, registered forms/logos
and secure print data are erased. Postscript download fonts are
also erased.
[Status]
Secure print job is being printed.
Print data can be received from the computer.
[Note]
Report/List is being printed.B
Print data cannot be received from the computer while a report/
list is being printed.
[Cause]
An error occurred, and printing was not finished success-
fully.
[Action]
Check the error code [***-***] on the display, and take the
appropriate action.
"6.5.2 List of Error Codes2(P.237)
[Status]
You pressed the <Online> button, and the printer is in the
off-line state. To exit the off-line state, press the <Online>
button again.
In the off-line state, print data cannot be received from the com-
puter.
[Status]
You pressed the <Online> button, and the printer is in the
off-line state. To exit the off-line state, press the <Online>
button again.
In the off-line state, print data cannot be received from the com-
puter.
[Cause]
To use the secure/sample print function, the corresponding
optional installation is necessary.
[Action]
The internal hard disk (optional) must be installed to use the
secure/sample print function.
6.5 List of Messages
Cause/action
6
227
Advertisement
Table of Contents
Troubleshooting
