Table of Contents
Advertisement
Message
Empty Center
Output Tray
Clear Ctr Tray Open & Close F
Storing image...
****
Tray*
Cancelling...
****
Tray*
Check Bypass
Check Bypass
Press Set
xxxxxxxx
Waiting for data
xxxx
Please reboot printer
Replace Toner Cartridge: K
[Cause]
The center output tray is filled with paper.
[Action]
Unload paper from the center output tray.
"3.1 Main Components and Their Functions" (P.30)
[Cause]
A paper jam has occurred at the center output tray ejection
port.
[Action]
Remove the jammed paper.
"6.2.8 Paper Jams in the Finisher" (P.201)
[Status]
Secure print jobs are being spooled.
Print data can be received from the computer.
[Status]
Data during printing is discarded.
Print data can be received from the computer.
[Cause]
The paper loaded in tray 5 (Bypass) is incorrect.
[Action]
Load tray 5 (Bypass) with paper of which the size/direction
is xxxx and type is XXXX.
"5.4 Loading Paper" (P.114)
[Cause]
Your print instruction specified [Bypass-wait user].
[Action]
Load paper tray 5 (Bypass) with paper of size and orienta-
tion xxxx and type XXXX or check that this paper is loaded
in tray 5 (Bypass). Then press the <Eject/Set> button on the
control panel. Printing will start.
"5.4 Loading Paper" (P.114)
[Status]
The printer is waiting for print data.
Print data can be received from the computer.
[Cause]
Some error occurred.
[Action]
Switch off the printer, and make sure that the control panel
display goes off, then switch it back on. If the same mes-
sage appears again, write down [***-***]. Switch off the
printer, and make sure that control panel display goes off.
Then unplug the power cord. Contact our customer support
Center or your dealer.
[Cause]
Almost no toner remains in the black toner cartridge.
[Action]
Replace with a new black toner cartridge.
"5.5.2 Replacing Toner Cartridges" (P.135)
6.5 List of Messages
Cause/action
6
229
Advertisement
Table of Contents
Troubleshooting
